Rinstrum’s In Motion Axle Scale, the axleWEIGHr, is a fast, accurate and economical way to monitor commodities that are coming into or leaving your facilities.

• Monitor yields
• Document for Insurance purposes
• Verify tonnage before you get to local elevator
• Low cost with high return

Operation: Drive over the scale while moving a consistent 2-3 mph. The scale will automatically weigh each axle and print a receipt with individual axle weights and the total. If you store the trucks ID and tare weight, or use 2 pass weighing, the controller will calculate the Gross, Tare and Net values.

Easy: The In Motion Axle Scale is preconfigured for easy installation. The load cells are factory calibrated and the indicator is preprogrammed. All wiring uses watertight M12 connectors. Just install, add power, zero the scale and start weighing.

Accuracy: On average better than +-0.05% repeatability can be expected. Company testing as well as extensive field trials have shown that with extended flat and level concrete approaches 0.02% or better accuracy can be achieved. Individual results may vary. Well maintained vehicles weigh the best.

Economical: About 1/4 of the cost of a full length truck scale. With the In Motion Axle Scale you will always know the total vehicle weight and the individual axle weights. Never worry about being overloaded again.

Certified: The scale is certified by SKS Engineering a third party engineering firm for “in road use” at 40mph up to 50,000 pounds.

Warranty: Two years on electronics and load cells (printer 1 year)